Castrol Alphasyn PG 460

Product Name

Castrol Alphasyn PG 460 - 208L

Castrol Alphasyn PG 460 - 20 L

Clear

Select Option

Add to compare

Description

CASTROL Alphasyn PG 460

Synthetic gear oils

Application CASTROL Alphasyn PG 460

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.

Performance, Features & Benefits of CASTROL Alphasyn PG 460 are:

Low coefficient of friction reduces energy consumption and lowers operating temperatures, this leads to longer oil life.
Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil based products.
Inherently high VI makes the product suitable for operations over a wide temperature range.
High load carrying capacity and good wear protection reduces maintenance.

If you have any questions, please contact Procare Technical Helpdesk

Product Description CASTROL Alphasyn PG 460

The Castrol Alphasyn™ PG gear oil range of synthetic lubricants are based on polyalkyleneglycol (PAG) fluids enhanced with antioxidants, rust inhibitors and Extreme Pressure (EP) additives of high thermal stability.

Typical Characteristics

Product specifications :		Castrol Alphasyn PG 460
Density @ 15°C / 59°F kg/m³	ISO 12185 / ASTM D4052	1060
Kinematic Viscosity @ 40°C /104°F mm²/s	ISO 3104 / ASTM D 445	460
Kinematic Viscosity @ 100°C /212°F mm²/s	ISO 3104 / ASTM D 445	80
Viscosity Index	ISO 2909 / ASTM D2270	255
Pour Point °C/°F	ISO 3016 / ASTM D97	-36/- 32.8
Flash Point – closed cup method °C/°F	ISO 2719 / ASTM D93	210/410
Foam Sequence I – tendency / stability ml/ml	ISO 6247 / ASTM D892	10/0
Rust test – distilled water (24 hrs)	ISO 7120 / ASTM D665A	Pass
Timken OK Load test kg/lb	ASTM D2782	38.6/85
FZG Gear Scuffing test – A/8.3/90 Failure Load Stage	ISO 14635-1	>12

Additional Information

Normal industrial paints are not compatible with these lubricants. Gearboxes should be left unpainted internally, or alternatively should be painted with two component coatings such as epoxy resins. Care must be taken that seal materials are compatible with these lubricants. The recommended materials are nitrile rubber (NBR), silicone (VMQ), fluoro-silicone rubber (FMQ), and fluoroelastomers (FKM). Incompatible materials are likely to shrink or swell, thus causing either severe leakage or seizure of the seal. These products are not miscible with mineral oils.

Satisfied customers

Quality brands only

genuine packages

Save costs

take control of your costs save time and money

Deliveries

incoterm DAP

Castrol industry lubricants

Shell Lubricants

Total Lubricants

Mobil Lubricants