Shell Helix Ultra ECT 0W-30 C2/C3

Shell Helix Ultra ECT C2/C3 0W-30 Main Applications

• Shell Helix Ultra ECT C2/C3’s fully synthetic formulation uses Shell’s most advanced emissions-compatible technology to help gasoline engine exhaust catalysts and keep diesel particulate filters clean and protects it from ash build-up that can block the exhaust system and lead to reduced engine performance.
• Shell Helix Ultra ECT C2/C3 can be used for modern gasoline engines, diesel engines with particulate filters and gas engines.
• Shell Helix Ultra ECT C2/C3 0W-30 is suitable for use in vehicles currently using SAE 5W-30 or 10W-30 grades, providing enhanced engine protection and fuel economy

Shell Helix Ultra ECT C2/C3 0W-30 Performance, Features & Benefits:

• + Shell’s most advanced emissions-compatible technology for low-SAPS oil
• + Shell’s ultimate active cleansing technology
• + Unsurpassed sludge protection
• + Superior wear protection
• + Developed with special antioxidants
• + Low viscosity and low friction
• + Superior piston cleanliness
• + Superior corrosion protection
• + Superior intake valve cleanliness
• + Exceptional low-temperature performance
• + High resistance to mechanical stress
• + Low evaporation formulation

Performance, Features & Benefits of Shell Helix Ultra ECT C2/C3 0W-30

+ Shell’s most advanced emissions-compatible technology for low-SAPS oil

Protects emission system by helping to keep diesel particulate filters clean.

+ Shell’s ultimate active cleansing technology

Helps to protect high-performance engines from powerand performance-robbing deposits

+ Unsurpassed sludge protection

No other motor oil can keep your engine closer to factory clean

+ Superior wear protection

Up to 4x better than API SN specification 2. Up to 50% better than ACEA C2/C3 requires

+ Developed with special antioxidants

Helps to provide excellent oxidation protection throughout the oil-drain interval.

+ Low viscosity and low friction

Up to 2.6% greater fuel economy

+ Superior piston cleanliness

Up to 45% cleaner than ACEA C2/C3 requires 5. Exceeds the requirements of API SN specification

+ Superior corrosion protection

Up to 3x better corrosion protection than required by API SN

+ Superior intake valve cleanliness

Exceeds the requirements for VW based on VW FSI test

+ Exceptional low-temperature performance

Faster oil flow for quicker engine warm-up

+ High resistance to mechanical stress

Maintains viscosity and stays in grade throughout the oil-change interval.

+ Low evaporation formulation

Low oil consumption for less frequent top-up.

Specifications, Approvals & Recommendations Shell Helix Ultra ECT C2/C3 0W-30

• ACEA C2/C3
• API SN
• VW 504.00/507.00
• MB-Approval 229.52, 229.51, 229.31
• Fiat 9.55535-GS1, 9.55535-DS1* (meets requirements)
• Porsche C30 *Should not be used for Fiat SDE 1.3L Euro 6 engines.

To find the right Shell Helix product for your vehicles and equipment, please consult Shell LubeMatch at: http://lubematch.shell.com

If you have any questions, please contact Procare Technical Helpdesk

Health, Safety & Environment of Shell Helix Ultra ECT C2/C3 0W-30

Health and Safety

Shell Helix Ultra ECT C2/C3 0W-30 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Helix Ultra ECT C2/C3 0W-30 to an authorised collection point. Do not discharge into drains, soil or water.

Typical Physical Characteristics of Shell Helix Ultra ECT C2/C3 0W-30