Castrol industry lubricants
Unlock the complete range of Castrol industrial lubricants with us! Experience seamless solutions for your machinery’s peak performance!
Can’t find what you need? Don’t worry and we’ll be delighted to assist,
just ask us
CASTROL Transmax ATF Z previously Transmax Z
Automatic Transmission Fluid
Performance, Features & Benefits of CASTROL Transmax ATF Z are:
- Excellent resistance to oxidation prolonging the life of the lubricant, offers extended drain potential and lowers operating costs.
- Enhanced protection against deposits extends transmission life.
- Temperature reduction in severe service improves transmission and oil service life and helps reduce fuel consumption and emissions
- Optimised frictional characteristics providing smoother gear changes and protects against wear
- Outstanding cold flow properties giving high protection to transmission especially at start-up
Product Performance Claims of CASTROL Transmax ATF Z are:
- MAN 339 Typ Z3, MAN 339 Typ Z12, MAN 339 Typ V2
- ZF TE-ML 04D,11B,14C,16M,16S, 20C, 25C
- VW 501 60
- MB-Approval 236.81
- Voith H55.6336.xx
- JASO 1A
- Toyota T, T II, T III, T IV, WS
- Nissan Matic D, J, S
- Mitsubishi SP II,IIM, III, PA, J3, SP IV
- Mazda ATF M-III, M-V, JWS 3317, FZ
- Subaru F6, Red 1
- Daihatsu AMMIX ATF D-III Multi, D3-SP
- Suzuki AT Oil 5D06, 2384K, JWS 3314, JWS 3317
- Hyundai/Kia SP III, SP IV
- Aisin Transmissions requiring JWS 3309
- Honda/Acura DW 1/Z 1
- Isuzu (where Toyota T-IV is required)
- Suitable for use in BMW, VW, Audi and Jaguar 5 speed automatic transmission and MB 4 and 5 speed automatic transmissions.
If you have any questions, please contact Procare Technical Helpdesk
Product Description CASTROL Transmax ATF Z
CASTROL Transmax ATF Z is a high quality full synthetic transmission fluid. It is particularly recommended for use in automatic and semi automatic transmissions used in buses and coaches. It may also be used in manual transmissions. As such it is recommended for fleets employing a mixture of Voith, Renk, ZF, Allison and MB transmissions alongside the Leyland Pneumocyclic and Hydracyclic units. Extended oil drain [120.000 km] in ZF Ecomat, MB AT and Voith AT
Typical Characteristics
| Product specifications : | CASTROL Transmax ATF Z | |
| Density @ 15C, Relative g/ml | ASTM D4052 | 0.836 |
| Viscosity, Kinematic 40C mm²/s |  ASTM D445 | 38 |
| Viscosity, Kinematic 100C mm²/s |  ASTM D445 |  7.5 |
| Viscosity Index | ASTM D2270 | 170 |
| Viscosity, Brookfield @ -40C (75W)Â mPa.s (cP) | ASTM D2983 | 8400 |
| Pour Point °C | ASTM D97 | -66 |
| Flash Point, COC °C | ASTM D92 | 228 |
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.
