Mobil THERM 605

Product Name

Mobil THERM 605 208 L

Mobil THERM 605 20 L

Clear

Select Option

Add to compare

Description

Mobiltherm 605

Heat transfer oils

Application Mobiltherm 605

Application consideration: Mobiltherm heat transfer oils should not be mixed with other oils as this may compromise the excellent thermal and oxidation stability, which may result in a change in other properties and makes analysis difficult to determine the useful life of the oil. If the oil is used above the recommended operating temperature, a gas bubble may form unless the installation is designed to operate at a higher temperature by keeping it under pressure with an inert gas such as nitrogen. Higher temperatures shorten the service life of the oil as thermal degradation increases significantly while temperatures rise above the recommended limit. In a well-designed installation, the temperature of the oil film in the heating element should be kept about 15°C to 30°C above the bulk oil temperature. A higher temperature will shorten the life of the oil and sludge and coke formation may occur, which can impede heat transfer. As with other mineral oils, Mobiltherm heat transfer oils should only be used in systems equipped with a circulating pump. Systems where only convection is used to move the oil will not provide sufficient flow to prevent local overheating, resulting in rapid degradation of the oil. Furthermore, these oils are not recommended for use in open installations where hot oil is in direct contact with air. If they leak or spray through openings, hot Mobiltherm may ignite spontaneously. The Mobiltherm 600 series can be used in open and closed systems if the temperature of the bulk oil corresponds to the following table. Mobiltherm 603: Closed systems (up to 285º C), Open systems (up to 150º C). Mobiltherm 605: Closed systems (up to 315º C), Open systems (up to 180º C). Mobiltherm 610: Open systems (up to 250°C). Mobiltherm 611: Open systems (up to 275°C).

Performance, Features & Benefits of Mobiltherm 605 are:

The Mobiltherm 600 Series offers the following advantages: Mobiltherm is one of Mobil’s specialty brands that has earned a reputation for quality and reliability in the most difficult applications. Modern refinery techniques are an important factor in providing excellent product properties.

Features	Advantages and Potential Benefits
High resistance to thermal cracking and decomposition	No sludge formation and coke formation and minimal obstruction of heat transfer and minimisation of maintenance needs
Excellent thermal properties	High heat transfer rate and improved efficiency and lower operating costs
Good thermal and oxidation stability	Prolonged trouble-free service life and less downtime
Good fluidity at low temperatures	Easy start of cold systems

Product Description Mobiltherm 605

Mobiltherm heat transfer oils are high performance products intended for use in closed systems for indirect heating. They are recommended for use in systems (without warm contact with oxygen) for indirect heating and cooling in all kinds of industrial processes. Mobiltherm heat transfer oils are formulated with highly refined base oils that resist thermal cracking and chemical oxidation. They have high thermal stability and can have a very long service life without precipitation or viscosity increase. Mobiltherm heat transfer oils have good heat and viscosity transfer efficiency and are easily pumpable at both start-up and operating temperatures. They show specific heat and high thermal conductivity for faster heat dispersion. Due to their resistance to thermal cracking at recommended operating temperatures, the flash point of these oils does not increase significantly during use.

If you have any questions, please contact Procare Technical Helpdesk

Health, Safety & Environment of Mobiltherm 605

Health and Safety

Mobiltherm 605 Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet.

Protect the enviroment

Mobiltherm 605 to an authorised collection point. Do not discharge into drains, soil or water

Typical Characteristics

Product specifications :		Mobiltherm 605
Property		605
Density at 15 C, kg/l	ASTM D1298	0,857
Flash point, Cleveland Open Cup, °C	ASTM D92	230
Kinematic viscosity at 100 C, mm2/s	ASTM D445	5,4
Kinematic viscosity at 40 C, mm2/s	ASTM D445	30,4
Solidification point, °C	ASTM D97	-12

What is Mobil THERM 605 and what is it used for?

Mobil THERM 605 is a high-performance thermal oil used in heat transfer systems. It is designed for use at high temperatures up to 315°C and provides excellent performance and reliability. Mobil THERM 605 is commonly used in industrial applications such as chemical and petrochemical industries, food processing, textile and polymer production.

What are the properties of Mobil THERM 605 that make it suitable for use in heat transfer systems?

Mobil THERM 605 has a number of properties that make it suitable for use in heat transfer systems. Firstly, it has a high boiling point, which makes it resistant to high temperatures and thermal degradation. Second, it has a low flash point and is non-volatile, meaning that it can be used safely in closed systems without the risk of flammability. Third, it has excellent thermal stability and oxidation resistance, giving it long-lasting and reliable performance. Finally, it has good heat transfer properties and a low pour point, which ensures good fluidity at low temperatures.

Where to buy Mobil THERM 605?

Procare is the largest online lubricant webshop with only worldwide well-known brands including Mobil THERM 605. Procare customers appreciate the convenience and time-saving of being able to buy lubricants online 24/7 at competitive prices. No questions asked: Knowledge is our strength!

Satisfied customers

Quality brands only

genuine packages

Save costs

take control of your costs save time and money

Deliveries

incoterm DAP

Castrol industry lubricants

Shell Lubricants

Total Lubricants

Mobil Lubricants