Shell Aeroshell Turbine Oil 560

Name: Shell Aeroshell Turbine Oil 560 - Procare Lubricants
Availability: InStock

Select Option

Add to compare

Description

Aeroshell Turbine Oil 560

Synthetic lubricating oil for aircraft turbine engines

Application Aeroshell Turbine Oil 560

Changes which have taken place over the last twenty years in engine performance (in terms of improved fuel consumption, higher operating temperatures and pressures) and maintenance practices have resulted in increased severity in lubricant operating conditions. AeroShell Turbine Oil 560 was developed to withstand the hostile environments of today’s high powered, high compression engines in which the older generation of oils can be stressed up to and beyond their thermal limits, as evidenced by oil coking in the high temperature bearing areas. By overcoming the problems associated with using old technology oils in new technology engines, AeroShell Turbine Oil 560: maintains a cleaner engine; provides improved load carrying capacity; reduces maintenance costs; prolongs bearing life in both new and existing engines. In order for military authorities to take advantage of this better performance in military engines the specification MIL-PRF-23699 was re-written to include a “High Thermal Stability” (HTS) grade as well as the Standard (STD) and Corrosion Inhibited (C/I) grades. AeroShell Turbine Oil 560 is fully approved as an HTS oil. With the advent of the new civil turbine oil specification, SAE AS5780, which has more stringent requirements than the military specification, AeroShell Turbine Oil 560 was approved as a SPC (Standard Performance Capability) oil. With effect from January 1st 2002, AeroShell Turbine Oil 560 has been manufactured with an improved formulation to further enhance its anti-coking performance. AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.

Specifications of Aeroshell Turbine Oil 560 are:

MIL-PRF-23699G Grade HTS
SAE AS5780D Grade SPC
DEF STAN 91-101 (British) equivalent
COMAC QPL-CMS-OL-202
DCSEA 299/A (French) equivalent
VNII NP 50-1-4F, B3V, LZ-240, VNII NP 50-1-4U and 36/KuA (Russian) analogue
NATO Code O-154
Joint Service Designation OX-27 equivalent
Pratt & Whitney 521C Type II
General Electric D-50 TF 1
Allison EMS – 53 (Obsolete)
CFM: CFM56 & LEAP series
Engine Alliance: GP7200 series
GE: CF34, CF6, GE90, GEnx, GE9X, Passport, H series, Catalyst, CF 700
Honeywell: CFE738, ALF502, LF507, TPE331, CTS800
IAE : V2500 Series
Pratt & Whitney, Canada: JT15, PT6, PW110, 120, 200, 300 series
Pratt & Whitney: JT3C, JT8D, JT9D, PW4000, PW6000 and PW2000 (for in-service evaluation)
Rolls-Royce: Model 250, BR 710, RB211 series, Tay, Spey, Tyne, Avon, RB199
Safran Helicopter Engines: MTR390, Astazou, Arrius, Artouste, Astazou, Arrius
Honeywell: All APUs for 5cSt oils
Pratt & Whitney: APS Series for 5cSt oils, PW 901, PW980 Full details of the approval status of AeroShell Turbine Oil 560 in APUs and other engines/accessories is available. AeroShell Turbine Oil 560 is also approved for use in the industrial and marine versions of Pratt & Whitney FT Series engines, all General Electric LM Series Aero Derived Engine and Siemens where Rolls Royce engines are approved.

Product Description Aeroshell Turbine Oil 560

AeroShell Turbine Oil 560 is a third generation, high performance, low coking 5 mm2 /s synthetic hindered ester oil incorporating a carefully selected and finely balanced combination of additives to improve thermal and oxidation stability.

If you have any questions, please contact Procare Technical Helpdesk

Health, Safety & Environment of Aeroshell Turbine Oil 560

Health and Safety

Aeroshell Turbine Oil 560 Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet.

Protect the enviroment

Aeroshell Turbine Oil 560 to an authorised collection point. Do not discharge into drains, soil or water

Typical Characteristics

Product specifications :		Aeroshell Turbine Oil 560
Oil type		Synthetic ester
Kinematic viscosity @100°C mm2/s	ASTM D445	5.21
Kinematic viscosity @40°C mm2/s	ASTM D445	26.7
Kinematic viscosity @-40°C mm2/s	ASTM D2532	10 229
Flashpoint Cleveland Open Cup °C	ASTM D92	262
Pour Point °C	ASTM D97	-60
Total Acidity mgKOH/g	SAE-ARP-5088	0.20
Evaporation Loss 6.5 hrs @204°C % m	ASTM D972	2.0
Foaming Tendency ml	ASTM D892	Passes
Swelling of Standard Synthetic Rubber – SAE-AMS 3217/4, 72 hrs @204°C swell %	FED-STD-791 M.3604	12.9
Elastomer compatibility, % weight change after 24/120 hours: Fluorocarbon @200°C	DEF STAN 05-50 M.22	Passes
Elastomer compatibility, % weight change after 24/120 hours LCS Fluorocarbon @200°C	DEF STAN 05-50 M.22	Passes
Elastomer compatibility, % weight change after 24/120 hours Nitrile @130°C	DEF STAN 05-50 M.22	Passes
Elastomer compatibility, % weight change after 24/120 hours Silicone @175°C	DEF STAN 05-50 M.22	Passes
Elastomer compatibility, % weight change after 24/120 hours Perfluoroelastomer @200°C	DEF STAN 05-50 M.22	Passes
Thermal Stability / Corrosivity 96 hrs – Metal weight change mg/cm	FED-STD-791 M.3411	Passes
Thermal Stability / Corrosivity 96 hrs – viscosity change %	FED-STD-791 M.3411	1.3
Thermal Stability / Corrosivity 96 hrs – Total Acid Number Change mgKOH/g	FED-STD-791 M.3411	1.5
Corrosion and Oxidation Stability 72 hrs @175°C	ASTM D4636 – Alternate Proc.2	Passes
Corrosion and Oxidation Stability 72 hrs @204°C	ASTM D4636 – Alternate Proc.2	Passes
Corrosion and Oxidation Stability 72 hrs @218°C	ASTM D4636 – Alternate Proc.2	Passes
Ryder gear test, relative rating Hercolube A %	FED-STD-791 M.6508	Passes
Bearing Test Rig Type 1 1/2 conditions – Overall deposit demerit rating 200 hrs	FED-STD-791 M.3410	Passes
Bearing Test Rig Type 1 1/2 conditions – viscosity change @40°C %	FED-STD-791 M.3410	Passes
Bearing Test Rig Type 1 1/2 conditions – Total acid number change mgKOH/g	FED-STD-791 M.3410	Passes
Bearing Test Rig Type 1 ½ conditions – Filter Deposits g	FED-STD-791 M.3410	Passes
Trace metal content	ASTM D5185 or D6595	Passes
Sediment	FED-STD-791 M.3010	Passes
HLPS dynamic coking @20hrs @375°C Deposit mg	SAE ARP 5996	0.17
Sonic shear stability – viscosity change @40°C %	ASTM D2603	0.3

What is the application of Shell Aeroshell Turbine Oil 560?

Shell Aeroshell Turbine Oil 560 is a turbine oil specifically designed for use in gas turbines, aircraft turbines and other turbine-driven machinery.

What are the main characteristics of Shell Aeroshell Turbine Oil 560?

Shell Aeroshell Turbine Oil 560 has high thermal stability and good protection against oxidation. It also offers good protection against wear and corrosion. It also features a high viscosity index, which allows it to maintain its oil-film thickness at high temperatures.

Is Shell Aeroshell Turbine Oil 560 suitable for use in high temperatures?

Yes, Shell Aeroshell Turbine Oil 560 is specially designed to perform in high temperatures. Thanks to its high viscosity index, the oil maintains its oil-film thickness at high temperatures, keeping machines protected from wear and corrosion.

Where can I buy Shell Aeroshell Turbine Oil 560?

Procare is the largest online lubricating oil webshop with only globally known brands, including Shell Aeroshell Turbine Oil 560. Procare customers appreciate the convenience and time-saving that they can buy lubricants online 24/7 at a competitive price. Questions no problem: Knowledge is our strength!

Satisfied customers

Quality brands only

genuine packages

Save costs

take control of your costs save time and money

Deliveries

incoterm DAP

Castrol industry lubricants

Shell Lubricants

Total Lubricants

Mobil Lubricants