Shell Morlina S4 B 320 20 L

Shell Morlina S4 B 320 Main Applications

• Applications involving moderate loads Shell Morlina S4 B is recommended for systems that include moderately loaded gearboxes, worm gear drives, vacuum pumps, and gearboxes with internal backstops subjected extreme temperature variations. The enhanced energy efficiency of Shell Morlina S4 B will help reduce friction in operating equipment and potentially reduce energy consumption.
• Lubricated for life systems The long oil life of Shell Morlina S4 B makes is suitable for use in certain ‘lubricated-for-life’ systems.
• Bearing and circulating oil systems Shell Morlina S4 B is recommended for use in systems containing plain or rolling element bearings, including those with highly loaded bearings commonly found in cement or quarrying applications. Note: Where Bearing & Circulating oils with a lower viscosity is required (ISO VG 32 and 46), please use Shell Corena S4 R.

Shell Morlina S4 B 320 Performance, Features & Benefits:

• + Extra Long oil life – maintenance saving
• + Excellent wear and corrosion protection
• + Enhancing system efficiency

Performance, Features & Benefits of Shell Morlina S4 B 320

+ Extra Long oil life – maintenance saving

The use of highly stable synthetic base oils in conjunction with robust rust and oxidation inhibitor additives help provide excellent oxidation and hydrolytic stability. This allows Shell Morlina S4 B to extend the maintenance capability of equipment compared to products based on conventional mineral oils. In addition, it resists the formation of harmful products from oxidation at high operating temperatures which helps maintain system cleanliness and the reliability of the equipment. The excellent filterability of this product will also reduce contamination and further maintain cleanliness of the oil

+ Excellent wear and corrosion protection

Shell Morlina S4 B has been formulated to provide excellent anti-wear performance and provides high levels of wear protection for plain and rolling element bearings and moderately loaded gearboxes, compared to mineral oilbased products. This helps provide superior gear and bearing component life. In addition it also provides outstanding rust and corrosion protection of all metal surfaces.

+ Enhancing system efficiency

Shell Morlina S4 B can help improve the efficiency of lubrication in bearing and circulating systems. The superior low temperature performance and reduced variation in viscosity with increasing temperature, in comparison to mineral oil-based products, provides better lubrication at low start-up temperatures and the opportunity for energy savings through reduced pumping and flow losses during normal operating conditions. Rapid water shedding and efficient air release properties further enhance the efficiency of the lubrication system by helping maintain critical oil films between loaded components.

Specifications, Approvals & Recommendations Shell Morlina S4 B 320

• ISO 12925-1 Type CKT specification
• ANSI/AGMA 9005-E02
• DIN 51517, Part 3 (CLP Oils)
• Siemens/VAI ‘Morgan “Morgoil®” Lubricant Spec. New Oil (Rev. 1.1)’

If you have any questions, please contact Procare Technical Helpdesk

Health, Safety & Environment of Shell Morlina S4 B 320

Health and Safety

Shell Morlina S4 B 320 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Morlina S4 B 320 to an authorised collection point. Do not discharge into drains, soil or water.

Typical Physical Characteristics of Shell Morlina S4 B 320