Performance, Features & Benefits of TOTAL BIOHYDRAN SE 46 are:
- BIOHYDRAN SE has a natural high and stable viscosity index. No viscosity loss due to shear is observed. This stable viscosity level ensures an optimum hydraulic efficiency during all the fluid life
- The good lubricating properties and corrosion protection will extend the component life of hydraulic systems
- The excellent oxidation stability of BIOHYDRAN SE offers extended drain intervals compared to classical mineral hydraulic fluids.
- The very low foaming tendency and fast air release limit air contamination in the circuit
- BIOHYDRAN SE is miscible with classical HM and HV mineral hydraulic fluids.
- BIOHYDRAN SE contains more than 80 % of renouvelable carbons.
Specifications TOTAL BIOHYDRAN SE 46:
- ISO 15380 : HEES.
- DIN 51524 (for mineral oils): except DIN 51587 and ISO 13357
- DENISON : HF1, HF2 & HF6 approved.
- Registration number : FR/27/02 AFNOR CERTIFICATION. Reduced harm for water and soil during use. Reduced CO2 emissions. For more information on the European Ecolabel, please consult: http://ec.europa.eu/environment/ecolabel/
- Meet the requirements of the Swedish Standard SS 15 54 34.
- Meet the requirements of the specification CAT BF-2.
Precautions TOTAL BIOHYDRAN SE 46:
- It is recommended to check with the equipment supplier to see whether the installation is suitable for the use of synthetic ester based hydraulic fluids. BIOHYDRAN SE has a good compatibility level with NBR, HNBR, AU and FPM seals.
- Contact our technical service for advice changing from HM or HV fluids to BIOHYDRAN SE
If you have any questions, please contact Procare Technical Helpdesk
Health, Safety & Environment of TOTAL BIOHYDRAN SE 46
Health and Safety
TOTAL BIOHYDRAN SE 46 Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet
Protect the Environment
Take used TOTAL BIOHYDRAN SE 46 to an authorised collection point. Do not discharge into drains, soil or water.
Typical Physical Characteristics
| Properties |
|
TOTAL BIOHYDRAN SE 46
|
| Appearence Visual |
|
Clear and bright |
| Density at 15° kg/m3 |
ISO 3675 |
933 |
| Kinematic Viscosity at 40°C mm2/s |
ISO 3104 |
46 |
| Kinematic Viscosity at 100°C mm2/s |
ISO 3104 |
8,7 |
| Viscosity Index |
ISO 2909 |
146 |
| Iodine value cgl2/g |
|
2 |
| Flash Point ºC |
ISO 2592 |
280 |
| Pour Point ºC |
ISO 3016 |
– 42 |
| Biodegradabilily |
OECD 301 |
Contain more than 98% of ultimately biodegradable substances |
What is the temperature range of Total Biohydran SE 46 and what is it used for?
Total Biohydran SE 46 is a biodegradable hydraulic oil based on synthetic esters and special additives. It has a wide temperature range from -30°C to +100°C and is designed for use in hydraulic systems where a biodegradable oil is required, such as in agriculture, forestry, marine and other industries.
What are the properties of Total Biohydran SE 46 that make it suitable for use in hydraulic systems?
Total Biohydran SE 46 offers several properties that make it suitable for use in hydraulic systems. It is biodegradable and less harmful to the environment than traditional hydraulic oils. It has a wide temperature range, making it suitable for use in different environments and weather conditions. It offers excellent performance and protection against wear, oxidation and corrosion, extending equipment life and reducing maintenance costs. Finally, Total Biohydran SE 46 is compatible with most seals and coatings, allowing it to be used safely and effectively in hydraulic systems with different materials and designs.
Where can I buy Total Biohydran SE 46?
Procare is the largest online lubricant webshop with only worldwide known brands including Total Biohydran SE 46. Procare customers appreciate the convenience and time-saving of being able to buy lubricants online 24/7 at a competitive price. No questions asked: Knowledge is our strength!
