Performance, Features & Benefits of Total Quartz INEO FIRST 0W-30 are:
- Reduced environmental impact: Fuel savings of 3,33% as measured by the official ACEA M111 FE test and savings above 4,2% as measured during the NEDC cycle compared with 5W-40 grade oil in compliance with the official ACEA test used for measuring CO2 emissions. It guarantees compliance with all the levels of performance claimed by PEUGEOT, CITROËN and DS in relation to environmental standards.
- Protection for pollution-control systems: This lubricant also optimises the way in which three-way catalytic converters and particulate filters operate, preventing them from getting clogged up with soot or sludge deposits.This reduces particulate emissions, NOx, HC and CO in particular
- Engine protection and cleanliness: This oil offers the best possible protection in its category against wear and clogging as soon as the engine is started up
- Easier cold starts: The 0W-30 grade, together with special additives, makes cold engine starts easier, even at very low temperatures (validation tests carried out down to -40C)
- Oil change intervals: TOTAL QUARTZ INEO FIRST 0W-30 retains all of its properties, in accordance with the service plans recommended by PEUGEOT, CITROËN and DS
Specifications Total Quartz INEO FIRST 0W-30:
- ACEA C1
- PSA B71 2312 & 2302
- Meets the requirements of JAGUAR LAND ROVER STJLR.03.5007
- Suitable for TOYOTA
If you have any questions, please contact Procare Technical Helpdesk
Health, Safety & Environment of Total Quartz INEO FIRST 0W-30
Health and Safety
Total Quartz INEO FIRST 0W-30 Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet
Protect the Environment
Take used Total Quartz INEO FIRST 0W-30 to an authorised collection point. Do not discharge into drains, soil or water.
Typical Physical Characteristics
| Properties |
|
Total Quartz INEO FIRST 0W-30
|
| Viscosity grade |
SAE J300 |
0W-30 |
| Kinematic viscosity at 40°C mm²/s |
ASTM D445 |
50.1 |
Kinematic viscosity at
100°C mm2/s |
ASTM D445 |
9.8 |
| Density at 15°C kg/m3 |
ASTM D1298 |
843 |
| Viscosity index |
ASTM D2270 |
187 |
| Pour point °C |
ASTM D97 |
-48 |
| OC Flash point °C |
ASTM D92 |
234 |
What is the difference between Total Quartz INEO FIRST 0W-30 and other Total Quartz oils?
Total Quartz INEO FIRST 0W-30 is specially designed for the latest generation of Euro 6 diesel and petrol engines and has been developed to meet the latest requirements for emission control systems. It offers excellent fuel efficiency and reduces friction in the engine, thereby reducing fuel consumption. It also has fast oil circulation at cold start, providing better engine protection. It is distinguished from other Total Quartz oils by its high resistance to oxidation and wear, as well as excellent protection against deposits and abrasion.
For which vehicles is Total Quartz INEO FIRST 0W-30 suitable?
Total Quartz INEO FIRST 0W-30 is suitable for modern passenger cars and light commercial vehicles, including diesel and petrol engines with direct injection and after-treatment systems such as diesel particulate filters (DPF) and catalytic converters (CAT). It can be used in vehicles requiring an ACEA C2 or C3 specification, depending on manufacturer requirements. It is designed to meet the most stringent European emissions standards, including Euro 6. It is especially suitable for vehicles that require a thin oil to meet the stricter fuel efficiency and emission standards.
Where can I buy Total Quartz INEO FIRST 0W-30?
Procare is the largest online lubricant webshop with only worldwide well-known brands including Total Quartz INEO FIRST 0W-30. Procare customers appreciate the convenience and time-saving of being able to buy lubricants online 24/7 at competitive prices. Questions no problem: Knowledge is our strength!
