Castrol industry lubricants
Unlock the complete range of Castrol industrial lubricants with us! Experience seamless solutions for your machinery’s peak performance!
Can’t find what you need? Don’t worry and we’ll be delighted to assist,
just ask us
Shell Aeroshell Turbine Oil 390 24x 1 L
Aeroshell Turbine Oil 390
AeroShell Turbine Oil 390 is a 3 mm2 /s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil.
Application Aeroshell Turbine Oil 390
AeroShell Turbine Oil 390 was developed primarily as an improved 3 mm2 /s oil for British turbo-jet engines. AeroShell Turbine Oil 390 is fully approved for a wide range of turbine engines. · More recently, because of the low temperature characteristics of AeroShell Turbine Oil 390, there is interest in using this oil in auxiliary power units (APU) in order to overcome the effects of cold soak. Normal practice is to shut down the APU during cruise, the APU then experiences cold soak, often prolonged, and when the unit is started there is considerable difficulty resulting in the unit not coming up to speed in the given time, thus causing a hung start. In such cases where the APU is subject to a long cold soak the viscosity of standard 5 mm2 /s oils used in the APU will increase from 5 mm2 /s at 100°C to typically 10,000 mm2 /s at –40°C . At this much higher viscosity the oil cannot flow easily leading to a large viscous drag within the APU, thereby contributing to the difficulty in starting. AeroShell Turbine Oil 390 on the other hand experiences a much smaller viscosity increase (typically 2000 mm2 /s at –40°C ) with a reduction in viscous drag which is often sufficient to overcome hung start problems. All experience to date shows a considerable improvement in cold reliability of the APU when AeroShell Turbine Oil 390 is used.
Specifications of Aeroshell Turbine Oil 390 are:
- Approved DEF STAN 91-94 (British)
- Analogue to IPM -10, VNII NP 50-1 4f and 4u, and 36Ku-A (Russian)
- Joint Service Designation OX-7
- Pratt & Whitney Canada : PW901A APU
- Rolls Royce : Conway, Spey, Tay, M45H
- Turbomeca : Astazou, Artouste, Bastan VII, Marbore 6, Makila, Turmo
- Hamilton-Sundstrand: APS 500, 1000, 2000, 3000
Honeywell : GTCP 30, 36, 70, 85, 331 and 660 APUs Starters, Turbo Compressors
Product Description Aeroshell Turbine Oil 390
AeroShell Turbine Oil 390 is a 3 mm2 /s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil.
If you have any questions, please contact Procare Technical Helpdesk
Health, Safety & Environment of Aeroshell Turbine Oil 390
Health and Safety
Aeroshell Turbine Oil 390 Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet.
Protect the enviroment
Aeroshell Turbine Oil 390 to an authorised collection point. Do not discharge into drains, soil or water
Typical Characteristics
| Product specifications : | Aeroshell Turbine Oil 390 | |
| Oil type | Synthetic ester | |
| Density @15°C kg/l | 0.924 | |
| Kinematic viscosity @40°C mm2/s | 12.9 | |
| Kinematic viscosity @100°C mm2/s | 3.4 | |
| Kinematic viscosity @-54 mm2/s | <13000 | |
| Pourpoint °C | -68 | |
| Flashpoint Cleveland Open Cup °C | 225 | |
| Foam characteristics | Passes | |
| Trace element conten | Passes | |
| Elastomer compatibiity – nitrile % | Within range | |
| Elastomer compatibiity – viton % | Within range | |
| Elastomer compatibiity – silicon % | Within range | |
| Solid particle contamination – sediment mg/l | <10 | |
| Solid particle contamination – total ash of sediment mg/l |
<1 | |
| Corrosivity | Passes | |
| High temperature oxidative stability | Passes | |
| Load carrying ability | Passes |
What is the application of Shell Aeroshell Turbine Oil 390?
Shell Aeroshell Turbine Oil 390 is a turbine oil specifically designed for use in air and gas turbines, aircraft turbines and other turbine-driven machinery operating under extreme conditions such as high temperatures and pressure.
What are the main characteristics of Shell Aeroshell Turbine Oil 390?
Shell Aeroshell Turbine Oil 390 has high thermal stability and good protection against oxidation. It also offers good protection against wear and corrosion. It also features a high viscosity index and a low freezing point which means it continues to work at high temperatures and does not freeze at low temperatures.
Is Shell Aeroshell Turbine Oil 390 suitable for use in air and gas turbines?
Yes, Shell Aeroshell Turbine Oil 390 is specially designed for use in air and gas turbines operating under extreme conditions such as high temperatures and pressure. It provides good protection against wear and corrosion and maintains its oil film thickness at high temperatures.
Where can I buy Shell Aeroshell Turbine Oil 390?
Procare is the largest online lubricating oil webshop with only globally known brands, including Shell Aeroshell Turbine Oil 390. Procare customers appreciate the convenience and time-saving that they can buy lubricants online 24/7 at a competitive price. Questions no problem: Knowledge is our strength!
Reviews
There are no reviews yet.