Shell Turbo S4 X 32 209 L

Shell Turbo S4 X 32 Main Applications

• Power and industrial steam, gas & combined cycle turbines  Shell Turbo S4 X 32 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines.
• Note that some applications with highly loaded gearboxes require a lubricant with enhanced anti-wear performance – for these applications use Shell Turbo S4 GX 32.
• Further industrial applications Shell Turbo S4 X 32 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors

Shell Turbo S4 X 32 Performance, Features & Benefits:

• + Extended oil life
• + Enhanced Equipment protection
• + Enhanced System Efficiency

Performance, Features & Benefits of Shell Turbo S4 X 32

+ Extended oil life

Shell Turbo S4 X 32 delivers exceptional resistance to oxidation even under conditions of high oxidative and thermal stress. Excellent results in both the ASTM dry TOST and the TOST life test (ASTM D943) demonstrate the potential for Shell Turbo S4 X 32 to offer extended service life and reduced maintenance costs when compared to conventional mineral oil technology.

+ Enhanced Equipment protection

The greater resistance against varnish and sludge formation provided by Shell Turbo S4 X 32 allows turbine systems to operate reliably even during severe peak load operation. Minimising the formation of sludge and bearing deposits not only reduces the wear of critical system components, but can also reduce the risk of an unplanned turbine shutdown.

+ Enhanced System Efficiency

Demulsibility, air release and resistance to foaming are critical performance factors for oil in the latest turbine designs (especially turbines which have shorter oil residence times). Shell Turbo S4 X 32 offers excellent performance in all three areas, ensuring that optimum operating conditions are maintained.

Specifications, Approvals & Recommendations Shell Turbo S4 X 32

Shell Turbo S4 X 32 meets & exceeds international specification and requirements of the major turbine manufacturers including:

• ASTM 4304-13 Type I & III
• GB (China) 11120-2011, L-TGA, L-TSA, L-TGSB
• DIN 51515 Part 1 L-TD & Part 2 L-TG, 51524-1 HL
• ISO 8068:2006 L-TGB, 8068:2006 L-TGSB
• Shell Turbo S4 X 32 is approved by Siemens Power Generation, spec TLV 9013 04 and TLV 9013 05
• General Electric GEK 32568K, 46506e, 28143b, 107395a and 120498
• Alstom HTGD 90117 V 0001 AA
• Dresser Rand 003-406-001 type I & III
• Westinghouse 21 TO591 and 55125Z3 and Eng Spec_DP21T-00000443
• Solar ES 9-224Y Class II
• MAN D&T SE TED 10000494596
• Shell Turbo S4 X 32 meets the specification of Elliott Turbomachinery X-18-0004
• GE Oil and Gas – Appropriate Specification listed under document ITN52220.04
• Shell Turbo S4 X 32 is approved against the requirements of MHPS MS04-MA-CL001 (Rev. 4), MS-MA-CL002 (Rev. 4) and MS04-MA-CL005 (Rev. 2) and MHI Compression.
• Shell Turbo S4 X 32 has been classified as a low varnishing type turbine oil by GE Oil & Gas against the specifications listed under document ITN52220.04

If you have any questions, please contact Procare Technical Helpdesk

Health, Safety & Environment of Shell Turbo S4 X 32

Health and Safety

Shell Turbo S4 X 32 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Turbo S4 X 32 to an authorised collection point. Do not discharge into drains, soil or water.

Typical Physical Characteristics of Shell Turbo S4 X 32